Posts & Bi-Arms

Strain Posts:- Corner or Intermediate Wall and Ground

Posts. Typically 50mm (2 inches) Pipes are used to anchor

Strain Insulators. Post are Hot-Dip Galvanised or Painted.

Wall Top Posts 1.1 Metres to 1.5 Metres in length. Groundup

posts 2.2 Metres to 2.6 Metres long. New preferred

post 63mm(2.5 Inch-outer Dia.) "B" Class GI Water Pipe

with two holes at the bottom to push perpendicular 1/4inch

steel anchor rods to imbedd in Concrete. Mounting of

strain insulators is efficiently achieved using Elsonic's

specially designed adjustable-position clamps that require

no holes or welds on the Galvanised pipes (otherwise

conventional posts with multiple mounting holes are prone

to rusting and could also weaken the post). Stone Pillars 9

inches by 4 or 5 Inches (cross-section) or concrete Posts 4

inches by 6 inches (cross-section) can also be used.

However clamp mounting on steel posts is a faster

installation process. # (*)

Projecting Arm for Tubular Strain Posts. Mounted with

integral bolt and fixed with nut for Elsonic's Patented Bi-

Arm Elephant Fence and Patented Multiple-Arm Security

Fence.(without Moisture Cap) # (*)

Stays:- To support and hold more firmly the Corner or

Intermediate Wall and Ground Posts. Typically 25mm (1

inch) Pipes are used for the Stays and are painted or

galvanised For wall-top applications the stays are 1.1

Metres to 1.5 Metres in length. For ground-up posts the

stays are 2.2 Metres to 2.6 Metres long. One end flattened

19 mm (3/4th. inch) or 25mm (1 inch) "B" Class GI Water

pipes may be used with holes at each end and fixed in

concrete with a cross-bar inserted into the bottom end

(prior to embedding in concrete)and the top flattened-end

fixed with an 'O' Clamp to the Strain Post.# (*)

Support Posts:- Intermediate 'T" Angle Wall and Ground

Posts. Typically 25 mm x 25 mm Steel 'T' Section used to

hold Reel Insulators. Posts Hot-Dip Galvanised or Painted.

Wall Top posts 1.1 Metres to 1.5 Metres in length. Groundup

posts 2.2 Metres to 2.6 Metres long. New preferred post

19mm (3/4th. Inch outer dia.) or 25mm (1 inch outer Dia.)

"B" Class, GI Water Pipes with one hole at the bottom to

push perpendicular anchor rod to imbedd in Concrete.

Mounting of reel insulators efficiently done with Elsonic's

patented pinch clamps without the need for holes or welds

on posts (otherwise conventional post with multiple

mounting holes prone to rusting & become weak due to the

holes made in them).Concrete Posts (6 inches by 4 inches

cross-section) with hooks or Stone Posts (9inches by 4 or

5 inches cross-section) are also used. GI posts with

Elsonic's proprietary clamps make work easy as the pinchclamps

can be fixed on Steel Angles or Pipes rapidly &

insulators pushed in with ease.# (*).

Projecting Arm for 'T' Angle Support Posts. Mounted with

integral clamps on T-Angles or Pipes for Elsonic's Patented

Bi-Arm Elephant Fence or Multi-Arm Security Fence.# (*)

Strain Post Moisture Caps. Plastic caps to be

placed or pasted on the vertically mounted fence

tubular posts to prevent moisture or rain from entering

the pipes.#

Support Post Moisture Caps. Plastic caps to be

placed or pasted on the vertically mounted fence

tubular posts to prevent moisture or rain from entering

the pipes. #